Medusa Research is proud to introduce the
Afterburner V2 Series of high
efficiency brushless motors.
Through the combination of metallurgically advanced ultra low loss lamination steel,
computer
designed stator, and
vented case these motors have unrivaled performance.
The new Afterburner V2 Series of motors offers increasedEfficiency, morePower, andbetterPerformance.
The Afterburner
V2 Series brushless motors will outperform otherIn-runnersas well asOut-runnersin
direct
drive and
geared applications.
Higher Efficiency with Venting means:
lCooler Motor
Temperature for consistent performance,
lLonger Flight
times,
lMore Output
Power.
Higher Quality components:
lUltra Low
loss lamination steel,
lHardened
Stainless Steel Shaft
lABEC 5 Bearings
(unlike most other motors that use the lower rated ABEC
1)
We use Quality Materials
with an Advanced
Design
so you get
Extreme Performance!
With all of the brushless motor choices available on
the market, it is important to understand why we are
different. Anyone can wind magnet wire and assemble
a motor, but only a few can design a motor specifically
for the RC enthusiast. All of our motors are designed
in the USA by Medusa Research’s experienced electric
motor engineers, and were created with the needs of
RC models in mind. Our design is the result of cutting
edge computer simulation and years of real-world testing.
For performance, price, and quality of workmanship,
our motors are simply the best on the market today.
Medusa’s 28mm
motors are designed to be speed 400 replacements that
not only give you the efficiency of a brushless motor
but even more power. These motors have identical mounting
screw locations and come in 3 different lengths. The
wide selection of Kv ratings make it easy to select
the motor with the perfect size and power for your model
whether it is direct drive or for gear drive applications.
Compare our specifications and you will see Medusa’s
28mm
motors are the best choice for your model.
Want a factory mounted gearbox on your new motor? Get a
V2 Motor + Gearbox combo
and save both money and time!
Afterburner motors provide more
power, higher efficiency, and longer flight times than
other available brushless motors.
*Based
on adequate air flow around motor, i.e., open
air stream behind propeller
**Max I can be present for 30 seconds All Medusa Research motors are rated for 60,000
RPM operation
For the best efficiency, your ESC should be setup
with 8º to 15º advance, and a switching rate of 10
to 20kHz.
The above motors have 4 poles.
Purchase
Introductory price, for a limited time! (Reg. $99.95)
MR-028-056-2800V2
MR-028-056-1900V2
MR-028-056-1400V2
MR-028-056-0900V2
MR-ADD-CONN-3.5
Introductory price, for a limited time! (Reg. $89.95)
MR-028-040-3400V2
MR-028-040-2500V2
MR-028-040-2200V2
MR-028-040-1700V2
MR-028-040-1200V2
MR-028-040-1000V2
MR-ADD-CONN-3.5
Introductory price, for a limited time! (Reg. $79.95)
motors are designed to be speed 400 replacements that
not only give you the efficiency of a brushless motor
but even more power. These motors have identical mounting
screw locations and come in 3 different lengths. The
wide selection of Kv ratings make it easy to select
the motor with the perfect size and power for your model
whether it is direct drive or for gear drive applications.
