Medusa Research's Battery Eliminator Circuits eliminate
the need for a separate battery pack to run the
receiver and servos by stepping down the voltage
of the main battery. Smaller, secondary battery
packs are a nuisance to maintain and charge, take
up valuable space, and add weight to your model.
Removing them through the use of a BEC frees up
the space and weight, and reduces the number of
failure-prone parts. The 2 Amp BEC is specifically
designed for smaller models. It is only 20x22mm,
less than one square inch in size! A typical receiver
and servo battery pack weighs approximately 90 grams,
while the 2 Amp BEC only weighs 10! A battery eliminator
circuit of this size is an industry first. Medusa
Research BECs save space in your model, can boost
performance by improving your thrust-to-weight ratio,
and are a cost effective alternative to secondary
battery packs. While the standard 5 Volts is perfect
for most applications, the 2 Amp BEC is available
in 6 Volts for faster servo throws. The 2 Amp BEC
is also available in 9 Volts for use with mini-cameras
and other 9V accessories and should not be used
to power standard 5V equipment.
Purchase
MR-BEC-35020-5
(5V)
MR-BEC-35020-6
(6V)
MR-BEC-35020-9 (9V)
5V
6V
9V**
Electrical
Specifications
Min
Max
Min
Max
Min
Max
NiCD/NiMH
Cells
6
25
6
25
6
25
Li/LiPo
Cells
2
8
2
8
2
8
Input
Voltage
4V*
35V
4V*
35V
4V*
35V
Output
Voltage
5.00V
5.15V
6.00V
6.20V
9.00V
9.25V
Continuous
Output Current
N/A
2A
N/A
2A
N/A
1.7A
Peak
Output Current
N/A
2.4A
N/A
2.4A
N/A
2.0A
Number
of Standard Servos (typical)
N/A
4
N/A
4
N/A**
N/A**
Physical
Specifications
Width
24mm
Length
24mm
Thickness
9mm
Weight
w/o wires
6g
Weight
w/ wires
12g
*Output
voltage will be zero for input voltages
less than the minimum. For inputs
less than the rated output voltage,
the output will match the input.
**9
Volts can permanently damage receivers
and servos. Please consult the specifications
of your equipment.
