Medusa Research's Battery Eliminator Circuits eliminate the need for a separate battery pack to run the receiver and servos by stepping down the voltage of the main battery.
Smaller, secondary battery packs are a nuisance to maintain and charge, take up valuable space, and add weight to your model. Removing them through the use of a BEC frees up
the space and weight, and reduces the number of failure-prone parts. The 1.5 Amp BEC is specifically designed for the small lightweight models. It is only 21x21mm, less than
3/4 square inch in size! Medusa Research BECs save space and weight in your model, can boost performance by improving your thrust-to-weight ratio, and are a cost effective
alternative to secondary battery packs. While the standard 5 Volts is perfect for most applications, the 1.5 Amp BEC is available in 6 Volts for faster servo throws.
ESC connects directly to BEC. Removing or
cutting wires is no longer necessary.
Purchase
MR-BEC-35015-5
(5V)
MR-BEC-35015-6
(6V)
5V
6V
Electrical
Specifications
Min
Max
Min
Max
NiCD/NiMH
Cells
6
25
6
25
Li/LiPo
Cells
2
8
2
8
Input
Voltage
4V*
35V
4V*
35V
Output
Voltage
5.00V
5.15V
6.00V
6.20V
Continuous
Output Current
N/A
1.5
N/A
1.5
Peak
Output Current
N/A
2.0
N/A
2.0
Number
of Standard Servos (typical)
N/A
3
N/A
3
Physical
Specifications
Width
21mm
21mm
Length
21mm
21mm
Thickness
9mm
9mm
Weight
5.5g
5.5g
Weight
w/ wires
9g
9g
*Output
voltage will be zero for input voltages
less than the minimum. For inputs
less than the rated output voltage,
the output will match the input.
