Medusa Research

V2 Motors w/Bonded Fin Heatsinks

Get increased cooling with a bonded heatsink. A bonded heatsink transfers the heat from the motor to the air better then just a slip-on heatsink. The heatsink is permanently attached to the motor so it won't slip off or move and there are no air gaps that reduce the effectiveness of the heatsink. The heatsink is positioned in the middle of the motor where the most heat is generated to provide the best cooling possible.

NOTE: Not recommended for motors used in EDF (i.e. Ducted Fan) applications!

MR-028-032-XXXXV2H

	Increased cooling over a slip-on heatsink.
	No air gaps to reduce effectiveness.
	Permanently attached, will not move or slip.
	27mm long heatsink, 40mm outside diameter.

Purchase

Not sure which motor you want? Go to the 28mm Brushless Motors page for more information, or use our Motor Calculator.
MR-028-032-XXXXV2H	Unavailable

MR-028-040-XXXXV2H

	Increased cooling over a slip-on heatsink.
	No air gaps to reduce effectiveness.
	Permanently attached, will not move or slip.
	27mm long heatsink, 40mm outside diameter.

Purchase

Not sure which motor you want? Go to the 28mm Brushless Motors page for more information, or use our Motor Calculator.
MR-028-040-XXXXV2H	Unavailable

MR-028-056-XXXXV2H

	Increased cooling over a slip-on heatsink.
	No air gaps to reduce effectiveness.
	Permanently attached, will not move or slip.
	36mm long heatsink, 40mm outside diameter.

Purchase

Not sure which motor you want? Go to the 28mm Brushless Motors page for more information, or use our Motor Calculator.
MR-028-056-XXXXV2H	Unavailable

MR-036-050-XXXXV2H-3F

	Increased cooling over a slip-on heatsink.
	No air gaps to reduce effectiveness.
	Permanently attached, will not move or slip.
	39mm long heatsink, 48mm outside diameter.

Purchase

Not sure which motor you want? Go to the 28mm Brushless Motors page for more information, or use our Motor Calculator.
MR-036-050-XXXXV2H-3F	Unavailable

MR-036-050-XXXXV2H-5

	Increased cooling over a slip-on heatsink.
	No air gaps to reduce effectiveness.
	Permanently attached, will not move or slip.
	39mm long heatsink, 48mm outside diameter.

Purchase

Not sure which motor you want? Go to the 28mm Brushless Motors page for more information, or use our Motor Calculator.
MR-036-050-XXXXV2H-5	Unavailable

MR-036-060-XXXXV2H-5

	Increased cooling over a slip-on heatsink.
	No air gaps to reduce effectiveness.
	Permanently attached, will not move or slip.
	39mm long heatsink, 48mm outside diameter.

Purchase

Not sure which motor you want? Go to the 28mm Brushless Motors page for more information, or use our Motor Calculator.
MR-036-060-XXXXV2H-5	Unavailable